Filter
Top Products
CHAPTER 3 - BIOS SETUP
SYS7180VE User’s Manual
27
Advanced Chipset Features
Use this menu to change the values in the chipset registers and optimize your system's
performance.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals. See section 6.6. for the
details.
Power Management Setup
Use this menu to specify your settings for power management.
PnP / PCI Configuration
This entry appears if your system supports PnP / PCI.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the minimal/stable performance for your
system to operate.
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory settings for optimal
performance system operations. While Award has designed the custom BIOS to maximize
performance, the factory has the right to change these defaults to meet their needs.
Supervisor / User Password
Use this menu to set User and Supervisor Passwords.
Save & Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Save
Abandon all CMOS value changes and exit setup.
CHAPTER 3 - BIOS SETUP
28
SYS7180VE User’s Manual
3.3 Standard CMOS Setup
The items in Standard CMOS Setup Menu are divided into 10 categories. Each category
includes no, one or more than one setup items. Use the arrow keys to highlight the item and
then use the <PgUp> or <PgDn> keys to select the value you want in each item.
Main Menu Selections
This table shows the selections that you can make on the Main Menu
Item Options Description
Date Month DD YYYY
Set the system date. Note that the
‘Day’ automatically changes when
you set the date
Time HH : MM : SS Set the system time
IDE Primary Master
Options are in its sub
menu(described in Table 64)
Press <Enter> to enter the sub
menu of detailed options
IDE Primary Slave
Options are in its sub
menu(described in Table 64)
Press <Enter> to enter the sub
menu of detailed options
IDE Secondary Master
Options are in its sub
menu(described in Table 64)
Press <Enter> to enter the sub
menu of detailed options
IDE Secondary Master
Options are in its sub
menu(described in Table 64)
Press <Enter> to enter the sub
menu of detailed options
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy disk drive
installed in your system