Intel SBFCM Stereo Receiver User Manual


 
45
Show Config command
Display port, switch, alarm threshold, and zoning attributes for the current configuration.
Authority
User
Syntax
show config
port [port_number]
switch
threshold
zoning
Keywords
port [port_number]
Displays configuration parameters for the port number given by [port_number]. Ports are numbered
beginning with 0. If the port value is omitted, all ports are specified.
NOTE
For external ports (0,15), all parameters apply. For internal ports (1 through 14) only
AdminState applies. For information about port numbering and mapping, see Table 37 on
page 124.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples
The following is an example of the Show Config Port command.
FCSM: user1> show config port 15
Configuration Name: lei
-------------------
Port Number: 15
------------
AdminState Online
LinkSpeed Auto
PortType GL
TLPortMode TLTargetMode
ISLSecurity Any
SymbolicName Port15
ALFairness False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnable True
LCFEnable False
MFSEnable True