Filter
Top Products
132 Intel Blade Swerver Switch Module SBCEFCSW / FC Expansion Card SBFCM: HMM and Troubleshooting Guide
10. If an IDE hard disk drive is in IDE connector 2, remove the drive and tray (save the screws that
secure the tray to the system board); otherwise, remove the two screws near IDE connector 2
that secure the system board to the chassis.
11. Install the I/O expansion option tray, which comes with the Expansion Card. Secure the tray to
the system board using a Phillips* screwdriver and the screws from the option kit.