Integra DTR-7.2 Stereo Receiver User Manual


 
46
Preference
4-1. Volume Setup sub-menu
This sub-menu allows you to make various settings concerning the
volume control of the DTR-7.2.
a. Volume Display
You can choose from two ways of displaying the volume setting on
screen.
Absolute: This displays the volume with a minimum of min (0)
for no sound and a maximum of max (100). As a reference, the
volume setting of Ref (82) is used as the 0-decibel for the
relative display method.
Relative: This displays the volume as a decibel value on a scale
with a designated reference point that is displayed as 0, which
equals the volume setting of 82 for the absolute display method.
With this display method, the minimum value is , the next
highest is 81, and the maximum value is +18.
b. Muting Level
This sets the attenuation level during playback when the MUTING
button is pressed on the remote controller. This can be set between
, 50 and 10 decibels in 10-decibel increments.
c. Maximum Volume
This setting allows you to set the maximum volume that can be
output with the Master Volume dial to prevent components from
being damaged by excessively loud volumes. For the absolute
volume display method, this can be set between 50 and 99. For the
relative volume display method, this can be set between 32 and +17
decibels. To not set a maximum volume, select Off.
d. Power On Volume
This sets a designated volume setting for the DTR-7.2 to be set every
time that the power is turned on. This prevents the DTR-7.2 from
being turned on while it is set to an extremely high volume and
suddenly output very loud sounds. For the absolute volume display
method, this can be set between min and max. For the relative
volume display method, this can be set between and +18
decibels. If you do not mind having the DTR-7.2 turned on with its
current volume setting, set this to Last.
4. Preference menu
Advanced Menu
4.Preference
1.Volume Setup
2.Headphones Level
3.OSD Setup
4.OSD Position
|ENTER|Quit:|SETUP|
Advanced Menu
4.Preference
4-1.Volume Setup
a.Volume Display
:Absolute
b.Muting Level
:-oodB
c.Maximum Volume
:Off
d.Power On Volume
:Last
Quit:|SETUP|