Filter
Top Products
11
Remote controller
VOL button [50, 53]
For adjusting the volume.
TEST/MENU button
TEST: Outputs a test tone for setting speaker levels.
Use this button in conjunction with the LEVEL
/ and CH SEL
buttons to calibrate the speakers levels without entering the Setup
menu. When TEST button is pressed, the test noise (pink noise) is
output. Use the LEVEL
/ buttons to increase or decrease the
sound level. Use the CH SEL button to change from speaker to
speaker. For a more detailed explanation of how to calibrate the
speaker levels, see page 32.
MENU: When in the DVD mode, this button displays the DVD
menu. [58]
MUTING button [50]
Activates the mute function.
ZONE 2/SEARCH/ENTER button
ZONE 2: When in the RCVR mode, press this button to perform
operations on the remote zone (Zone 2). [54]
SEARCH: When in the DVD mode, for finding the specific section
on a disc where you want to start playback. [58]
ENTER: When in the MD mode, for confirming the selection. [59]
AUDIO/TV/VCR button
AUDIO/A: For selecting the audio input signal. The setting changes
from “Auto” to “Multich” to “Analog” and back each time this
button is pressed. [53]
TV/VCR: Must be preprogrammed for use in the TV and VCR
modes. [63]
LEVEL /ANGLE and LEVEL /SUBTITLE buttons
LEVEL / : Select the speaker whose volume is to be adjusted
using the CH SEL button and adjust the volume using the LEVEL /
buttons in the RCVR mode. [52]
ANGLE: When in the DVD mode, for selecting a camera angle
when a DVD-Video is recorded with multiple angle playback. [58]
SUBTITLE: When in the DVD mode, for selecting one of the
subtitle languages recorded on a DVD-Video. [58]
CD/TAPE/DVD/MD operation buttons [56-59]
For operating other Integra/Onkyo components connected to the
DTR-7.2 through the
terminals.
INPUT SELECTOR buttons [50]
Selects an input source.
Same as the input selector buttons on front panel of the DTR-7.2.
The input source for each buttons is given here. DVD:DVD, CD:CD,
V1:VIDEO1, V2:VIDEO2, V3:VIDEO3, V4:VIDEO4,
V5:VIDEO5, TAP:TAPE, TUN:FM/AM, PH:PHONO.
Numeric key/Listening mode SP A, B/
Re-EQ/DISPLAY/DIMMER buttons
1 to 9, +10, --/---, 0: For entering the number of a track. [57-63]
STEREO, DIRECT, DSP
/ , SURR, THX: You can select a
listening mode. [51]
SP A, SP B: Not used with the DTR-7.2.
Re-EQ: Depending on the listening mode, you can turn the cinema
re-equalization function on or off. [42, 44]
DISPLAY: For changing the display in the front display. [52]
DIMMER: Adjusts the display brightness.
There are three settings available: normal, dark and very dark. [52]
LIGHT button
For illuminating the buttons of the remote controller.
This button is useful when using the remote controller in dark
locations. When pressed, the buttons on the remote controller light
green.
The button for the mode currently selected lights brighter than the
rest.
MODE MACRO button [67]
For executing and programming the Macro function.
SETUP button [27]
For displaying and quitting the Setup menu.
/ / / , ENTER button [27]
When selecting items in the Setup menu, press the upper and lower
portions to select an item, press the right and left portions to select
parameter values or modes, and press ENTER to select the item.