Integra DTR-7.2 Stereo Receiver User Manual


 
34
Input Setup
Initial settings for each input source
Input source Digital input
CD OPT 1
PHONO ----
FM
AM
TAPE OPT 2
VIDEO 1 COAX 2
VIDEO 2 COAX 3
VIDEO 3 OPT 3
VIDEO 4 ----
VIDEO 5 Optical on front panel (fixed)
DVD COAX 1
---- : Available for digital input but not set in initial settings.
: Not available for digital input.
2. Input Setup menu
This menu allows you to setup the various input sources available
with the DTR-7.2. Each input source may have a great number of
settings that are difficult to keep track of, so we recommend making
a chart to record what you have set and for which component to
prevent confusion later.
2-1. Digital Setup sub-menu
The settings made in this sub-menu are valid for the input source that
is currently selected with the input source buttons at the front panel
and, therefore, these settings are made separately for each digital
input source. This sub-menu will not appear if the selected input
source button is AM or FM. If this setting is incorrectly made, the
digital audio signals may not be properly output, or not heard at all.
Also, since VIDEO 5 is fixed to the optical digital terminal on the
front panel, this sub-menu will not appear if VIDEO 5 is selected.
Advanced Menu
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.Intelli Volume
6.Listening Mode Preset
|ENTER|Quit:|SETUP|
Input:DVD
Advanced Menu
2.Input Setup
2-1.Digital Setup
a.Digital Input
:COAX1
b.Digital Format
:All
Quit:|SETUP|
Input:DVD
Input:DVD
a. Digital Input
This setting tells the DTR-7.2 which input source button on the front
panel is connected with which digital input jack on the rear panel. To
perform this setting, you must first select a digital input source at the
front panel and then set the name of the digital input jack it is
connected to here.
For example, if the input source selected at the front panel is CD and
the compact disc player is connected to DIGITAL INPUT (OPT) 1,
then select OPT1 here. If the input source selected is not connected
to a digital input, then select ----.
OPT1-3: Connect your digital components to any of the
DIGITAL INPUT (OPT) terminals 1 through 3.
COAX1-3: Connect your digital components to any of the
DIGITAL INPUT (COAX) terminals 1 through 3.
----: Select if the input source is not from a digital input jack.