Filter
Top Products
80
Advanced Setup—Continued
OSD Setup
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select
“6. Miscellaneous,” and then
press [Enter].
The Miscellaneous menu appears.
3
Use the Up and Down [ ]/[ ]
buttons to select “2. OSD Setup,”
and then press [Enter].
The OSD Setup menu appears.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
6–2. OSD Setup
Immediate Display On
Monitor Type 4 : 3
Display Position Bottom
TV Format Auto
4
Use the Up and Down [ ]/[ ]
buttons to select the settings,
and use the Left and Right [ ]/
[ ] buttons to set them.
These settings determine how the oper-
ation details are displayed.
Immediate Display
This preference determines whether
operation details are displayed
onscreen when an AV receiver function
is adjusted.
On: Displayed (default).
Off: Not displayed.
Even when On is selected, operation
details may not be output if the input
source is connected to a COMPO-
NENT VIDEO IN or HDMI IN.
Monitor Type
With this preference, you can specify
the aspect ratio of your TV so that the
operation details are displayed prop-
erly.
4:3: Select if your TV is 4 : 3
(default).
16 : 9: Select if your TV is 16 : 9.
Display Position
This preference determines where on
the screen operation details are dis-
played.
Bottom: Bottom of the screen
(default).
Top: Top of the screen.
TV Format (not North American
model)
See “TV Format Setup (not North
American model)” on page 52.
5
When you’ve finished, press the
[Setup] button.
The setup menu closes.