Filter
Top Products
49
First Time Setup—Continued
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO OUT, select “---,” as
explained below.
If you’ve connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
verted* and output by the COMPONENT VIDEO OUT.
You can set this for each input selector by selecting the
“- - -” option.
Notes:
• For composite video and S-Video upconversion for
the COMPONENT VIDEO OUT, the HDMI Monitor
setting must be set to No (see page 47), and the Com-
ponent Video Input setting must be set to “- - -.” See
page 24 for more information on video signal flow and
upconversion.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Input selector VIDEO IN jack
DVD IN 1
VCR/DVR - - -
CBL/SAT - - -
GAME/TV - - -
AUX - - -
TAPE - - -
CD - - -
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “1. Input/Out-
put Assign,” and then press
[Enter].
The Input/Output Assign menu
appears.
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Input
3
Use the Up and Down [ ]/[ ]
buttons to select “3. Component
Video Input,” and then press
[Enter].
The Component Video Input menu
appears.
4
Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and then use the Left and
Right [ ]/[ ] buttons to select:
IN 1: Use the video component
connected to COMPO-
NENT VIDEO IN 1.
IN 2: Use the video component
connected to COMPO-
NENT VIDEO IN 2.
IN 3: Use the video component
connected to COMPO-
NENT VIDEO IN 3.
---: Output composite video
and S-Video sources from
the COMPONENT
VIDEO OUT.
There are no assignments for TUNER.
5
Press the [Setup] button.
The setup menu closes.
1–3. Component Video Input
DVD IN 1
VCR/DVR - - -
CBL/SAT - - -
GAME/TV - - -
AUX - - -
TAPE - - -
TUNER - - -
CD - - -