Filter
Top Products
8
Front & Rear Panels—Continued
(1 Tuning Mode button (57)
This button is used to select the Auto or Manual
tuning mode.
(2 Display button (55)
This button is used to display various information
about the currently selected input source.
(3 Setup button
This button is used to access the onscreen setup
menus that appear on the connected TV.
(4 Arrow/Tuning/Preset & Enter buttons
When the AM or FM input source is selected, the
Tuning [ ] [ ] buttons are used to tune the tuner,
and the Preset [ ] [ ] buttons are used to select
radio presets (see page 58). When the onscreen
setup menus are used, they work as arrow buttons
and are used to select and set items. The [Enter] but-
ton is also used with the onscreen setup menus.
(5 Return button
This button is used to return to the previously dis-
played onscreen setup menu.
(6 Master Volume control (54)
This control is used to adjust the volume of the AV
receiver to MIN, 1 through 99, or MAX.
(7 Zone 2/Off buttons (86)
The Zone 2 button is used to select the input source
for Zone 2.
The Off button is used to turn off the output of
Zone 2.
(8 Phones jack (56)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
(9 Zone 2 Level button (87)
This button is used to set the volume for Zone 2.
(: Tone, [–] & [+] buttons (55)
These buttons are used to adjust the bass and treble.
)1 Input selector buttons (54)
These buttons are used to select from the following
input sources: Multi CH, DVD, VCR/DVR,
CBL/SAT, Game/TV, AUX, Tape, Tuner, or CD.
The [Multi CH] button selects the DVD analog mul-
tichannel input.
)2 Setup Mic (41)
The included speaker setup microphone is con-
nected here for automatic speaker setup.
)3 AUX Input
This input can be used to connect a camcorder,
game console, and so on. There are jacks for optical
digital audio, S-Video, composite video, and analog
audio.
)4 Ready indicator (82) (Australian model)
Enters Ready mode and lights up when the HDMI
Power Control is set to Enable and the AV receiver
is on Standby.