Filter
Top Products
13
Remote Controller—Continued
The remote controller can be used to control different
components including the AV receiver. The remote con-
troller has a specific operating mode for use with each
type of component. Modes are selected by using the six
Remote Mode buttons.
■ Receiver/Tape Mode
In Receiver/Tape mode, you can control the
AV receiver and an Integra cassette recorder
connected via .
■ DVD and CD/MD/CDR/Dock Modes
With these modes, you can control a DVD
player and CD Player, MD recorder, CDR,
or RI dock. By entering the appropriate
remote control code, you can control com-
ponents made by other manufacturers (see
page 90).
■ TV, VCR and SAT/Cable Modes
With these modes, you can control a TV,
VCR, and satellite or cable receiver. You
must enter the appropriate remote control
code first (see page 90).
Note:
Some of the remote controller operations described in
this manual may not work as expected with other com-
ponents.
Receiver/Tape mode is used to control the AV receiver.
It can also be used to control an Integra cassette recorder
connected via .
Buttons
, , , and are used when the Tuner or
Tape input is selected.
Using the Remote Controller
1
Press one of the Remote Mode
buttons to select a mode.
2
Use the buttons supported by
that mode to control the compo-
nent.
Receiver/Tape mode:
see right column
DVD mode:
see page 15
CD/MD/CDR/Dock mode:
see page 16
TV, VCR, SAT/Cable modes:
see page 92
Receiver/Tape Mode
1
3
8
bk
2
9
6
7
3
2
bn
bp
br
bo
bq
bl
1
4
5
bm
4