Filter
Top Products
35
Connecting the AV receiver—Continued
Making HDMI Connections
■ Video Signals
Digital video signals received by the HDMI IN jacks are normally output by the HDMI OUT for display on your TV.
Composite video, S-Video, and component video sources can be upconverted for the HDMI output. See “Video Con-
nection Formats” on page 24 for more information.
■ Audio Signals
Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV
receiver. Normally, they are not output by the HDMI OUT, unless the HDMI Audio Out setting is set to On (see
page 82).
Note:
When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen
on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power
is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound may be cut
off.
To listen to audio received by the HDMI IN jacks through your TV’s speakers, set the HDMI Audio
Out setting to On (see page 82), and set your DVD player’s HDMI audio output setting to PCM.
Step 1: Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD player, TV,
projector, and so on.
Step 2: Assign each HDMI IN to an input selector in the HDMI Input Setup (see page 48).
Hint!
HDMI
IN
HDMI HDMI
IN 1
HDMI
OUT
TV
DVD player