Filter
Top Products
62
Using remote controller
RCVR Mode
TUN
CH
VOL
Muting
RCVR Mode
VOL
Muting
TAPE
operation
buttons
Overview
The RC-481M remote controller is a useful tool that can not only
operate the DTR-6.3/5.3, but also all the other components of your
home theater as well. To operate any component, first press the
Mode button on the remote controller that corresponds to the
component that you wish to control. Then simply press the desired
operation button and the component will operate accordingly. For
example, if you wish to select the CD input source at the DTR-6.3/
5.3 with the remote controller, first press the RCVR Mode button to
select the DTR-6.3/5.3 and then press the CD (Input Selector)
button.
Calling up a preset radio station
1. Press the RCVR Mode button.
The RCVR Mode button lights green.
2. Press the TUN input selector button.
3. Press the desired operation button.
Operation buttons:
CH : Selects the desired preset station number
You may also use the following buttons:
VOL : Adjusts volume at DTR-6.3/5.3
Muting: Activates muting function at DTR-6.3/5.3
Controlling an Onkyo cassette tape deck
The connector of the Onkyo cassette tape deck must be
connected to the DTR-6.3/5.3 (see page 29).
1. Press the RCVR Mode button.
The RCVR Mode button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo cassette tape deck.
Operation buttons:
: Play
: Stop
: Rewind
: Fast forward
: Skips to beginning of next track during playback
: Skips to beginning of current track during playback
Rec: Record/Pause
: Reverse playback
You may also use the following buttons:
VOL : Adjusts volume at DTR-6.3/5.3
Muting: Activates muting function at DTR-6.3/5.3
Note:
Even for devices with the and buttons, signal discrepancies
may cause them not to work properly.