Filter
Top Products
43
Selecting an Audio Component
Basic operation (DTR-6.3)
If you want to perform these operations using the remote controller,
first press the RCVR Mode button.
1. Press the desired input source.
The selected source name appears on the display. See “Enjoying
the multichannel output” (see page 46) when a DVD player with
a 5.1-channel input port is connected to the DTR-6.3.
2. Start playing the selected input source.
Follow the operating instructions for the source device.
3. Adjust the volume to an appropriate level.
Adjusting the main volume adjusts the volume level of all the
speakers connected to the DTR-6.3 together. If headphones are
connected, this also adjusts the volume heard from the
headphone speakers. To adjust the volume, either press the VOL
buttons on the remote controller or turn the Master Volume
dial. To increase the volume, turn the dial clockwise; to decrease
the volume, turn the dial counterclockwise. The volume can be
set to Min, 1 to 99, and Max.
DTR-6.3
Remote controller
DTR-6.3 Remote controller
DTR-6.3
Master Volume
Input source buttons
VOL
RCVR
Mode
Input Selector
buttons
• For more information about selecting the listening mode, see
page 48.
• You can set the sound quality using the Audio Adjust menu.
(See page 57 for more information.)
If no audio output is heard from the digital source (DVD, CD,
etc.) you have selected, see “Digital Input” on page 53.