Filter
Top Products
39
Configuring the speakers
Setting the speaker distance from your normal
listening position
Each speaker can be set between 1 and 30 feet (0.3 and 9 meters) in
1-foot (0.3 meter) increments. Select the setting closest to the actual
distance from the speaker to your normal listening position.
Note:
Speakers that you selected “No” or “None” for in the “Speaker
Config” menu will not appear in this menu.
1. Use the and cursor buttons to
select “2. Speaker Distance” on the
main menu and then press the
ENTER button.
The “Speaker Distance” menu appears.
2. Use the and cursor buttons to select “Unit” and
then use the
and cursor buttons to select the
desired unit of measure.
feet: Select if you will enter the distances in feet.
meters: Select if you will enter the distances in meters.
3. Use the and cursor buttons to select “Front L/R”
and then use the
and cursor buttons to set the
distance from the front speakers to your normal
listening position.
4. Use the and cursor buttons to select “Center” and
then use the
and cursor buttons to set the
distance from the center speakers to your normal
listening position.
Note:
You can only set a distance less than that set for the front speakers
and within 5 feet (1.5 meters) of the front speaker setting. For
example, if 30 feet (9 meters) is set for the front speakers, then the
center speaker distance can only be set between 25 and 30 feet (7.5
and 9 meters).
5. Use the and cursor buttons to select “Surround L/
R” and then use the
and cursor buttons to set the
distance from the left surround and right surround
speakers to your normal listening position.
Note:
You can only set a distance less than that set for the front speakers
and within 15 feet (4.5 meters) of the front speaker setting. For
example, if 30 feet (9 meters) is set for the front speakers, then the
surround speaker distance can only be set between 15 and 30 feet
(4.5 and 9 meters).
6. Use the and cursor buttons to select “Surround
Back” and then use the
and cursor buttons to set
the distance from the surround back speakers to your
normal listening position.
Press the Return button to return to the main menu.
Press the Menu button on the front panel or Setup button on the
remote controller button to exit the Setup menu.
Calibrating the speaker levels
Use this menu to set the volume for each speaker so that each volume
is heard by the listener at the same level. This is especially important
for speaker layouts where the left and right speakers are at different
distances or in asymmetrical positions due to room designs and
configurations. These settings and the distance settings performed in
the Speaker Distance menu are vital to create the proper sound space
and dynamics.
Note:
The speaker level settings here are not effective for multi-channel
input sources. To adjust the speaker levels for multi-channel input
sources, you will need to use the CH SEL, Level
, and Level
buttons on the remote controller. See page 47.
1. Use the and cursor buttons to
select “3. Level Calibration” on the
main menu and then press the
ENTER button.
The “Level Calibration” menu appears.
Note:
Speakers that you selected “No” or “None” for in the “Speaker
Config” menu will not appear.
2. Use the and cursor buttons to
select “Left.”
You will hear a pink noise from the front left
speaker.
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
|ENTER|Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
|ENTER|Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
2.Speaker Distance
***********************
a.Unit :feet
b.Front L/R :12ft
c.Center :12ft
d.Surround L/R : 7ft
e.Surround Back : 7ft
Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
3.Level Calibration
***********************
a.Left : OdB
b.Center : OdB
c.Right : OdB
d.Surr Right : OdB
e.Surr Back : OdB
f.Surr Left : OdB
g.Subwoofer : OdB
Quit:|SETUP|