Filter
Top Products
8
Remote controller
HOME THEATER CONTROLLER
RC
-
441M
J
I
H
G
F
E
D
C
B
A
0
8
9
1
K
2
3
4
5
6
7
SEND/LEARN indicator
This indicator acts as a guide when commands are programmed into
or sent by the remote controller. It also warns the user when an error
is made or battery power is low.
ON/STDBY button [18]
ON: Turns on the DTR-5.2.
STDBY: Places the DTR-5.2 in the standby state.
Be aware that pressing the STDBY button only places the DTR-5.2
in standby and does not turn the power completely off.
SLEEP button [26]
Sets the sleep function.
The SLEEP button enables you to set the DTR-5.2 to turn off
automatically after a specified time period.
DIRECT MACRO button [46]
For executing and programming the Direct Macro function.
MODE buttons and indicators [40-47]
For selecting the component to be operated by the remote controller.
When a MODE button is pressed, it will light green for 8 seconds.
The selected MODE button will also light whenever any other
operation button is pressed to tell you which mode the remote
controller is in.
RETURN button [21, 22, 29-32]
Press to move up one level in the setup mode.
CH/DISC button [35, 36]
When in the RCVR mode, for selecting a tuner preset channel.
For selecting the disc to be played back for components with disc
changers when in the DVD or CD modes.
CH SEL/TOP MENU button [9, 36]
CH SEL: For selecting the speaker for level adjustment when in the
RCVR mode. Used together with the LEVEL
/ buttons.
TOP MENU: When in the DVD mode, for displaying the menu
screen(s) recorded on DVD media.
AUDIO/A/TV/VCR button [27, 41]
AUDIO: For selecting the audio input signal. The setting changes
from “AUTO” to “MULTICH” to “ANALOG” and back each time
this button is pressed.
TV/VCR: Must be preprogrammed for use in the TV and VCR
modes.
LEVEL /ANGLE and LEVEL /SUBTITLE buttons
LEVEL
/ : Select the speaker whose volume is to be adjusted
using the CH SEL button and adjust the volume using the LEVEL /
buttons in the RCVR mode. [9, 27]
ANGLE: When in the DVD mode, for selecting a camera angle
when a DVD-Video is recorded with multiple angle playback. [36]
SUBTITLE: When in the DVD mode, for selecting one of the
subtitle languages recorded on a DVD-Video. [36]
CD/TAPE/DVD/MD operation buttons [34-37]
For operating Onkyo components connected to the DTR-5.2.