Filter
Top Products
34
HOME THEATER CONTROLLER
RC
-
441M
RCVR MODE
VOL
MUTING
Using remote controller
Overview
The RC-441M remote controller is a useful tool to help you operate
the components of your home theater. To do so, first press the Mode
button that corresponds to the device you wish to control. Then
simply press the desired operation button and the component will
operate accordingly. For example, if you wish to select the CD input
source at the DTR-5.2 with the remote controller, first press the
RCVR MODE button to select the DTR-5.2 and then press the CD
(INPUT SELECTOR) button.
Calling up a preset radio station
1. Press the RCVR MODE button.
The RCVR MODE button lights green.
2. Press the TUN input selector button.
3. Press the CH or button to select the desired
preset station number.
Controlling an Integra/Onkyo cassette tape deck
The z connector of the Integra/Onkyo cassette tape deck must be
connected to the DTR-5.2 (see page 14).
1. Press the RCVR MODE button.
The RCVR MODE button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Integra/Onkyo cassette
tape deck.
Operation buttons:
: Play
: Stop
: Rewind
: Fast forward
: Press during playback to skip to the beginning of the next track.
: Press during playback to skip to the beginning of the current
track.
REC/R: Record/Pause
: Reverse playback
You may also use the following buttons:
VOL : Adjusts the volume at the DTR-5.2
MUTING: Activates the muting function at the DTR-5.2
Note:
Even for devices with the and buttons, signal discrepancies
may cause them not to work properly.
TAPE
operation
buttons
RCVR MODE
TUN
CH