Filter
Top Products
40
HOME THEATER CONTROLLER
RC
-
441M
ON
STDBY
ENTER
MUTING
CABLE MODE
CH
VOL
Operating your programmed remote controller
Numeric keys
CABLE MODE (Cable Mode)
1. Press the CABLE MODE button.
The CABLE button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable TV unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off the cable TV unit (same as STDBY button on
the remote controller)
CH : Moves up and down the preset channel numbers
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL : Adjusts the volume at the DTR-5.2
MUTING: Activates the muting function at the DTR-5.2
SAT MODE (Satellite Tuner Mode)
1. Press the SAT MODE button.
The SAT button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off the satellite tuner unit (same as STDBY button
on the remote controller)
CH : Moves up and down the preset channel numbers
: Moves the cursor
ENTER: Confirms the selection
MENU: Displays the menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
: Adjusts the volume at the DTR-5.2
MUTING: Activates the muting function at the DTR-5.2
DVD MODE (DVD Player Mode)
Buttons with programmed usage and operations are the same as the
operational buttons on page 36.
After performing the procedure given above, the following
modes become enabled for use.
HOME THEATER CONTROLLER
RC
-
441M
ON
STDBY
MENU
ENTER
MUTING
SAT MODE
CH
VOL
Numeric keys
ENTER/Cursor
button