Filter
Top Products
52 Caring for MovieMate
Resetting the Lamp Timer
1. Press the button on the remote control. You see the following on the screen:
2. To reset the lamp timer, continue pressing the button until you see this display:
3. Press or to select
Yes.
4. Press the button to reset the timer.
The lamp usage timer displays 0H (zero hours) until you’ve used the lamp for at least
10 hours.
Storing MovieMate
Follow these guidelines when storing MovieMate:
■ Make sure the temperature and humidity of the storage area are within the recommended
range for the projector: 14 to 140 °F (–10 to 60 °C) and 10 to 90% relative humidity
without condensation.
■ Attach the lens cover.
■ Remove the batteries from the remote control.
■ Package MovieMate in its original packaging or equivalent (as described in the following
section).