Epson MovieMate 30s Home Theater System User Manual


 
Doing More with MovieMate 41
Changing Language Settings
You can use the Language Setup menu to change the default language for DVDs that allow
you to make this selection.
1. When a DVD is not playing, press the button on the remote control. You see the
LANGUAGE Setup menu:
2. Press to highlight the setting you want, then press to display a list of languages.
3. Press to select the language you want, then press to save it. For a list of language
code definitions, see page 67.
4. To return to the previous menu level, press .
Adjusting the Resume and On-Screen Guide Settings
1. When a DVD is not playing, press the button on the remote control.
2. Press to highlight and display the
OTHERS Setup menu.
3. Press to highlight
RESUME or ON SCREEN GUIDE, then press to display the
ON/OFF selection box.
4. Press to select the setting you want, then press to save it.
RESUME: This setting defines the way playback resumes after pausing. To have
playback resume from the point where it was stopped, set to
ON (the default). To
have playback start from the beginning of the chapter, set to
OFF.
ON SCREEN GUIDE: This setting, which is ON by default, briefly displays an
indicator on the screen when you pause, resume, or use other playback controls.
Select OFF if you don’t want these indicators to be displayed.
5. To return to the previous menu level, press .