Filter
Top Products
Mounting
Mount the 9739 MVD transmitter to an instrument pole
Prerequisites
• Use two 5/16-inch U-bolts for 2-inch pipe, and four matching nuts, that can withstand the process environment.
Micro Motion does not supply U-bolts or nuts.
• Ensure the instrument pole extends at least 12 inches (305 mm) from a rigid base, and is no more than 2 inches
(50.8 mm) in diameter.
Procedure
Mount the transmitter to an instrument pole, using Figure 2-3 as a guide.
Figure 2-3 Mounting the 9739 MVD Transmitter to an instrument pole
A
A
B
C
D
F
G
H
E
A 2 13/16 inches (71 mm) between mounting holes
B Four 5/16 inches (8 mm) nuts are required to secure 5/16-inch U-bolts
C 8 3/8 inches (213 mm)
D 2-inch pipe
E Two 5/16-inch 18 U-bolts required
F Output wiring conduit
G Power supply wiring conduit
H Sensor cable wiring conduit
6MicroMotion9739MVDTransmitters