Filter
Top Products
19
Presetting Radio StationsPresetting Radio Stations
Presetting Radio StationsPresetting Radio Stations
Presetting Radio Stations
You can preset up to 40 of your favorite AM and FM stations, in
any combination, in the tuner memory for easy recall.
1 Press the STANDBY button on the remote control to turn the
system On.
2 Press either the TUNER button on the remote control, or the
SOURCE button on the front panel, repeatedly to select the
Tuner function and the desired radio band, AM or FM.
3 Tune to the first station you wish to preset.
• Manual Tuning - repeatedly press the TUNING +/- buttons on
the front panel or the remote control until the desired
frequency appears on the display. (Note: You must use
manual tuning if your are trying to tune to a weak station.)
• Automatic Tuning - press and hold the TUNING +/- button on
the front panel or the remote control until the display begins
to scan up or down. It will stop on the first strong station it
finds. Repeat this process until it stops on your desired
station.
4 When the desired station appears on the display (Example:
FM 103.5 MHz) press the MEMO button on the remote
control. The Memory indicator and "P01" appear in the
display indicating that you are ready to enter that station in
preset memory #1.
5 Press the MEMO button on the remote control again to enter
the station into the memory. The Memory indicator and the
preset station number disappear and the station is
memorized.
6 To enter the next station in memory follow steps 2 and 3 to
tune the desired station and press the MEMO button on the
remote control. Then press either STA + or STA - button on
the remote control to select another preset memory number,
and press MEMO again to enter that station in the selected
preset memory number.
Note:
You must press the MEMO button to memorize a station while
the Memory indicator appears in the display (approximately 4
seconds), otherwise the station will not be memorized.
7 Repeat step 6 until you have entered up to 40 stations in the
tuner memory.
RR
RR
R
ecalling Precalling Pr
ecalling Precalling Pr
ecalling Pr
eset Staeset Sta
eset Staeset Sta
eset Sta
tionstions
tionstions
tions
1 Press STANDBY button on the remote control to turn the
system 'ON' and, if necessary, press the TUNER button to
select the Tuner function.
2 Press either the STA + or STA - button on the remote to
select the desired preset memory number.
You may also use the number keys on the remote control to
go directly to one of the preset memory stations. To select
preset stations 1 through 9, press the number key. To select
preset station numbers higher than 9 press the ">10" key one
or more times followed by the appropriate number key, for
example:
To Select Station Number Press These Keys
10 >10 and 0
15 >10 and 5
21 >10 twice and then 1
34 >10 three times and then 4
40 >10 four times and then 0
Changing Preset Stations
To change any of the preset stations simply tune to the new
station you wish to memorize and enter it in the preset memory
number you wish to change. The new station will be memorized
and the previous station will be erased.
SUB
TITLE
DVD T UNER AUX
LANGUAGE TITLE RETURN
ANGLEGO TO
MENU
AUDIO1
DISPL AY
23
456
789
>10 0
N/P
ADJ/VOL
SETUP
ENTE R
STOP
PLAY/PAUS E
STEP
A-B REPEAT
SLOW
PROG. SELECT
STA
-
STA
+
TUN TUN
+
ST/MO
MEMO
ZOOM
SLEEP MUTE
OPEN/
CLOSE
LISTENING
TEST
TONE
Number buttons
STATION+/-
TUNING+/-
TUNER
MEMORY
STANDBY