Filter
Top Products
58
Various Settings
• Automatic parametric equalizer (Advance Mode Only)
This can be used to automatically correct distortion in frequency characteristics (peaks
and dips) based on the results of measuring the frequency characteristics inside the
vehicle.
Automatic parametric equalizer correction is carried out in the following steps.
• Time alignment and crossover adjustment
Other adjustments besides adjustment of this main unit can be carried out using the ECLIPSE
web site. The procedure for doing this is displayed on the screen, and adjustment is
comparatively easy using this method. Access the ECLIPSE web site and follow the instructions
that appear on the screen. After doing this, download the adjusted data for the CD-R or Memory
Stick and load it into the main unit. (Refer to “Importing Sound Data“ for details of reading the
adjustment data.)
URL: http://www.e-iserv.jp
Frequency characteristic measurement
(Refer to "Measuring/display frequency characteristics" for
details.)
Saving sound quality data
(The folders and files that are required for E-iSERV sound
effect customizations are created automatically when the data
is written to the Memory Stick. Refer to "Measuring/display
frequency characteristics" for details.)
ECLIPSE web site accessing
(Access the following URL: http://www.e-iserv.jp)
Automatic parametric equalizer adjustment
(Follow the instructions given on the web site.)
Correction data downloading
(Follow the instructions given on the web site.)
Correction data reading
(Refer to "Importing Sound Data" for details.)
Time alignment and crossover adjustment
(Refer to "Time alignment adjustment" and "Crossover
adjustment" for details. In addition, adjustment and settings can
be carried out using the ECLIPSE web site.)