Filter
Top Products
48
Various Settings
Operations in the case where an
optional GPS unit (GPS105) is
connected
The following functions can be operated in
addition to the standard functions when an
optional GPS unit (GPS105) is connected:
• Automatic map-switching
• Guidance tone
ATTENTION
• When your vehicle enters the display/map
range of the guidance point, a blinking
marker will appear to indicate the position
of your vehicle.
When vehicle position marker leaves the
map range while traveling along the
guidance route, the vehicle position marker
disappears.
Automatic map-switching
The present area map will be displayed
automatically according to your vehicle
position on the map.
Auto Manual
Press the [ ] button to display the next
guidance point when "Manual" is selected.
Guidance tone
• When the displayed map is switched to the
next area map, a kind of beep will sound to
notify you of it. When your vehicle is
approaching the intersection, a different kind
of beep will sound to notify you of it.
• If your vehicle does not pass by the
intersection and the displayed map is
switched to the next area map, no beep will
sound.
Displaysbing the distance to go to
the next intersection
• The straight distance from your vehicle
position to the next intersection is renewed all
the time and displayed.
• “0”(zero) is displayed on the screen for the
distance to go until the map is switched to the
next area.
• When your vehicle has not passed by the
intersection, the distance to go will be
displayed, regardless of increase or
decrease in distance on the displayed map.
• A unit of distance is “mi” (mile) for the US
model and “km” (kilometer) for the Australia
model. However, those units are not displayed
on the screen.
1
Press the [RTN] button for more
than one second.
Vehicle position marker
➔
➔