Filter
Top Products
How to operate the AREA SHOT function (U.S.A. and CANADA only)
47
IX
Switching map
After having passed by each location
described in the guidance, it is necessary to
switch to the next guidance screen manually.
The previous screen can also be accessed
manually and confirmed.
The system can be set to switch the map
automatically when an optional GPS unit
(GPS105) is connected. (For details, refer to
"Automatic Map-switching" on page 48.)
[ ] button :
Switches to the next guidance point.
[ ] button :
Switches to the previous guidance
point.
By each press of the button, the
guidance display changes as follows:
Re-scrolling through text
information
Text information including intersection street
names and turn directions can be scrolled
across the screen. A maximum of 9
characters can be displayed on a single
screen. Excess characters are scrolled on the
display. When scrolling is complete, the first
nine characters are once more displayed on
the screen. To re-scroll perform the following
operation:
Guidance information can be re-
scrolled.
Changing AREA SHOT screens
In the AREA SHOT mode, the audio screen
can be accessed.
Pressing the button repeatedly allows
you to switch back and forth between
the AREA SHOT screen and the Audio
screen.
1
Press [ ] and [ ] to switch
between guidance points.
Start point
[] []
Intersections, etc.
Route between two
intersections (with the GPS
unit connected)
[] []
Destination
1
Press the [DISP] button.
1
Press the [RTN] button for less
than one second.