Filter
Top Products
Hughes Model HIRD-E86 Platinum HD Receiver
Page 7-18
Lock/Unlock
When you first receive your satellite system, it will be unlocked (that is, no limits or restrictions
are in effect). To enforce the limits (spending, ratings, and “Family” favorite list), you must lock
the system.
When the button on the MAIN MENU reads Lock, no lock symbol appears at the top of the menu
screen, indicating that the system is unlocked.
NOTE: Once the HD receiver is locked, only channels selected on the Family
list will be accessible. If the Family list does not have channels selected on it, no
channels can be viewed without first unlocking the HD receiver. To avoid this
inconvenience, verify the contents of the Family list before locking the HD
receiver. For additional information, refer to “Channel Lists” earlier in this
chapter.
Locking Procedure
When the Lock button is selected, the LOCK SYSTEM
pop-up screen is displayed. Use the and keys or the
remote control number keys to enter a four-digit
passcode of your choosing. If you enter the code using
the number keys, you will not see the numbers appear
on the screen. After entering a four-digit passcode,
highlight and select OK to proceed. Otherwise, choose
Cancel to cancel the locking process.
If you continue, you will be asked to confirm the code
by entering it again in the same fashion as before. Once
again, highlight and select OK to proceed. Otherwise,
choose Cancel.
Once OK has been selected, the HD receiver is locked. You will need your passcode whenever
you wish to unlock or override the lock. The on-screen button used to lock your system is now
used to unlock your receiver. A lock symbol appears at the top of every menu screen to remind
you that the HD receiver is locked.
Unlocking Procedure
To remove the lock and its restrictions, highlight the
Unlock button and press the key.
When the UNLOCK SYSTEM pop-up screen appears,
you can use the and keys or the remote control
number keys to enter the four-digit passcode that you
used to lock the HD receiver earlier. If you enter the
passcode using the number keys, you will not see the
numbers appear on the screen.
After entering the passcode, highlight OK and press the
key on the remote control.
Note: Once the HD receiver has been unlocked, all
limits and restrictions are removed!
Otherwise, choose Cancel to keep the lock in effect.
The LOCK pop-up panel
▲
▲
The UNLOCK pop-up screen
SELECT
▲
▲
SELECT