Filter
Top Products
HD Receiver’s Menu System
Page 7-11
be renamed. Once you have selected a list, a Rename List entry keyboard pop-up panel appears.
You can highlight the desired letter using the , , , and keys. Press to enter the letter.
When you have finished, choose OK.
Clear
You may decide to remove all channels from a particular list later on. Selecting Clear will allow
you to clear all channels from a chosen list. You may then add channels back in.
Set
If you decide to include all channels in a particular list, selecting Set will allow you to specify the
list. You may then remove channels from this list, if you so choose (see “Tag Boxes” below).
Tag Boxes
The four columns of small boxes on the right hand side of the CHANNEL LISTS screen are the
Tag Boxes. The first three columns are the lists traditionally known as Fav. A, Fav. B, and Fav. C.
The fourth column is the Family list.
In the CHANNEL LISTS screen, use the , , , and keys to highlight the button that
corresponds to the channel number and list that you wish to change. Press the key to add
or remove the check mark, which indicates that the channel in that row is included in the list
shown at the top of the column.
To help you decide whether to include or exclude a certain channel, the title of the currently
airing program for that channel will appear at the top of the screen.
Locking and unlocking the HD receiver is described later in this chapter. When the system is
locked, the passcode will be needed to modify the settings of the FAMILY channel list to use the
other channel lists.
TurboTune™
Highlighting the TurboTune button on the SETUP
screen and pressing the key on the remote
control displays the TURBO TUNE SETUP screen
shown at the right.
On the left are buttons for Done and Video, which are
explained below.
Done
Highlighting the Done button on the screen and
pressing the key on the remote control causes
an exit from the TURBO TUNE SETUP screen and
a return to the SETUP screen.
Video
Highlighting the Video button on the screen and pressing the key on the remote control
will return you to the last program you were viewing.
The TURBO TUNE SETUP screen is used to specify which nine channels will appear in the
TurboTune pop-up panel that displays when is pressed.
▲
▲
▲
▲
SELECT
▲
▲
▲
▲
SELECT
The TURBOTUNE setup screen
SELECT
SELECT
SELECT
SELECT