Getting Started Connections Setup Playback Remote Control Information
ENGLISH
Symptom Countermeasure Page
Playback does
not start when 1
button is pressed.
Playback stops
immediately.
• Is there condensation on the disc or player ? (Let stand for 1 or 2
hours.)
• Discs other than DVDs and music CDs cannot be played.
• Disc is dirty. Wipe off the dirt.
–
4
5
Picture is
disturbed during
the search
operation.
• Some disturbance is normal. –
Buttons do not
operate.
• Some operations are disabled for some discs. –
No subtitles are
displayed.
• Subtitles are not displayed for DVDs not containing subtitles.
• Subtitles are turned off. Turn the subtitles setting on.
–
18
Audio (or subtitle)
language does
not switch.
• The audio (or subtitle) language does not switch for discs which do
not include multiple audio (or subtitle) languages.
• For some discs the audio (or subtitle) language cannot be switched
when the operation to switch it is performed, but can be switched on
the menu screens.
–
26
Angle does not
switch.
• The angle cannot be switched for DVDs which do not contain multiple
angles. In some cases multiple angles are only recorded for specific
scenes.
–
Playback does not
start when the
title is selected.
• Check the “RATINGS” setting. 22
The password for
rating level has
been forgotten.
Reset all the DVD
setting to Factory
Preset.
• Initialize using the procedure described at “Resetting the
Microprocessor”.
39
The disc is not
played with the
audio or subtitle
language set
as the default
setting.
• The disc does not play with the selected audio or subtitle language if
that audio or subtitle language is not included on that DVD.
18
Picture is not
displayed in 4:3
(or 16:9).
• At the GUI menu’s “TV Aspect” setting, select “Normal (4:3LB)/
Normal (4:3PS)/Wide (16:9)” and set according to the TV you are
using.
19
GDVDH
Symptom Cause Countermeasure Page
Continuous noise
is heard when
receiving FM
programs
• Antenna cable is not properly
connected.
• Connect the antenna cable
properly.
• Connect an outdoor antenna.
14
Hissing or
continuous noise
is heard when
receiving AM
programs
• This may be noise from a TV or
interference from a radio station.
• Turn off the TV.
• Change the position and direction
of the AM loop antenna.
–
GTunerH
GAudioH
Symptom Countermeasure Page
Menu screen
messages for the
desired language
do not display.
• Check the default setting for the disc language’s menu language. 18
Symptom Cause Countermeasure Page
No sound is
output from
the monitor
connected
with HDMI
connections.
• HDMI audio signal output
destination setting is wrong.
• Set to “Setup” – “Video Setup”
– “HDMI Setup” – “HDMI Audio
Out”– “On”.
19
Troubleshooting
1.S-302E3_1st.indd 51 2007/07/31 17:45:16