Filter
Top Products
0
Getting Started Setup
ENGLISH
Connections Playback Remote Control Information Troubleshooting
f
Network Setup
Make settings for wired or wireless LAN.
Wired LAN
Make settings for wired LAN.
If a Ethernet cable is connected
To acquire the IP address automatically
using the DHCP function
To enter the IP address manually
Turn on the S-302’s power.
At the GUI menu “SETUP” – “Network Setup”
– “Network Setup” – “Detail” setting, set
“DHCP” to “OFF” and enter the IP address,
subnet mask, default gateway, primary DNS
and secondary DNS.
To not pass through the proxy server To connect via proxy server
At the GUI menu “SETUP” – “Network
Setup” – “Network Setup” – “Proxy” setting,
set “Proxy” to “ON” and enter the address or
domain name and port numbers.
This setting is required when the network
is established via proxy servers.
Recheck the connections and settings if you cannot connect to the Internet (vpage 15).
The mode automatically switches to “Wired”.
This completes the setting.
NOTE
Knowledge about networks is required to make the IP address and proxy settings. For details, consult a network administrator.
1.S-302E3_1st.indd 24 2007/07/31 17:44:48