Filter
Top Products
Getting Started Connections Setup Remote Control Information Troubleshooting
ENGLISH
Playable MP3/WMA file
File format
Sampling
frequency
(kHz)
Bit rate
(kbps)
Extension
MP3 32, 44.1, 48 32 ~ 320 .MP3
WMA 32, 44.1, 48 64 ~ 160 .WMA
During playback, press [REPEAT].
Playback in the respective repeat mode starts.
b DVD video discs:
Chapter repeated (“ ” lights on the display)
→ Title repeated (“ ” lights on the display)
→ Repeat playback cancelled (indicator turns off) →
b Music CD discs:
Track repeated ( )
→ Disc repeated ( ) → Repeat playback cancelled →
Playing Repeatedly <Repeat playback>
(DVD Video/Music CD)
Playing Tracks in the Desired Order
<Program> (Music CD)
Up to 20 tracks can be programmed.
1
In the stop mode, press [PROGRAM].
The “PROG” indicator lights.
2
Use [NUMBER] (0 ~ 9, +10) to select the traks.
b Example : To program tracks 3, 12, 7 to play in that order:
[3] [+10] [2] [7]
3
Press 1.
Checking the order of the programmed tracks
In the stop mode, press [CALL] repeatedly.
The track numbers are displayed in the programmed order each time
the button is pressed.
Clearing programmed tracks one track at a time
In the stop mode, press [CLEAR].
The last track programmed is cleared each time the button is
pressed.
Clearing the last programmed track
In the stop mode, press [PROGRAM].
The “PROG” indicator turns off.
Playing Random Order <Random playback>
(Music CD)
1
In the stop mode, press [RANDOM].
The “RAND” indicator lights.
2
Press 1.
The tracks start playing in random order.
Canceling random playback
In the stop mode, press [RANDOM].
The “RAND” indicator turns off.
There are many music distribution sites on the Internet allowing you
to download music files in MP3 or WMA (Windows Media
®
Audio)
format. The music (files) downloaded from such sites can be stored on
CD-R or CD-RW discs and played on the S-302.
“Windows Media” and “Windows” are registered trademarks or
trademarks in the United States and other countries of Microsoft
Corporation of the United States.
Playing Music Files
Before Playing MP3 or WMA Files
Creating MP3 and WMA Files
Compatible with the S-302
• Writing software format: “ISO9660 level 1”.
See the writing software’s instructions.
• Compatible: ID3-Tag (Ver.1 or 2), meta-tag.
• Incompatible: Packet write, playlists.
• Displayable characters: “Hankaku” English letters and numbers,
capital letters and _ (underscore).
No. characters displayable: 256
• When Playing MP3 or WMA Files, the digital output is converted to
PCM. The signals are output with the same sampling frequency as
when they were written.
• The positions of the folders or files may have been changed by the
writing software when burning the MP3/WMA files onto the CD-
R/CD-RW disc, so the files may not play in the expected order.
• Copyright-protected files cannot be played. Note that depending on
the software used for burning and other conditions, some files may
not play or display correctly.
Playing MP3 or WMA Files
1
Load a CD-R or CD-RW disc containing music les in
the MP3 or WMA format into the disc tray (vpage
4).
2
Select the folder you want to play using [ui], then
press [ENTER].
3
Select the le you want to play using [ui], then press
[ENTER] or 1.
Playback starts.
Switching the time display
During playback, press [DISPLAY].
b SINGLE ELAPSED (Elapsed time of currently playing track)
→ SINGLE REMAIN (Remaining time of currently playing track) →
Playback
1.S-302E3_1st.indd 31 2007/07/31 17:44:56