Filter
Top Products
Setup Playback Remote Control Information Troubleshooting
ENGLISH
Required system
n Broadband Internet connection
A broadband line connection to the Internet is required in order to
use the S-302’s Internet radio function.
n Modem
This is a device that is connected to the broadband line to
communicate with the Internet.
n Router
When using the S-302, we recommend you to use a router
equipped with the following functions:
• Built-in DHCP (Dynamic Host Configuration Protocol) server
This function automatically assigns IP addresses on the LAN.
• Built-in 100 BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
n Ethernet cable (CAT-5 or greater recommended)
The S-302 does not come with an Ethernet cable.
Purchase a cable of the required length.
n Computer
A computer with the following specifications is required to operate
the music server:
• OS
Windows® XP Service Pack2, Windows Vista
• Software
.NET Framework 1.1, Windows Media Connect (Windows XP),
Windows Media Player Ver.11
• Internet browser
Microsoft Internet Explorer 5.01 or later
• LAN port
• 300 MB or more free disk space
b Free space is required to save music files. The following sizes are
approximate.
Format Bit rate Per minute Per hour
MP3 / WMA
128kbps Approx. 1 MB Approx. 60 MB
192kbps Approx. 1.5 MB Approx. 90 MB
256kbps Approx. 2 MB Approx. 120 MB
392kbps Approx. 3 MB Approx. 180 MB
WAV (LPCM) 1400kbps Approx. 10 MB Approx. 600 MB
(1MB = 10
6
bytes)
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
• Depending on the server, video files may be displayed, but they
cannot be played on the S-302.
• For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
• The types of routers that can be used depend on the ISP. Contact an
ISP (Internet Service Provider) or a computer shop for details.
n Others
• If you have an ISP contract for a line on which network settings are
made manually, make the settings at “Network Setup” (vpage
20, 21).
• When using a broadband router (DHCP function), the S-302 makes
the network settings automatically, so there is no need to make
them yourself.
• If connecting the S-302 to a network with no DHCP function, make
the settings at “Network Setup” (vpage 20, 21).
• The S-302 is not compatible with PPPoE. A PPPoE-compatible
router is required if you have a contract for a line of the type with
which the PPPoE is set.
• Depending on the ISP with which you have your contract, it may
be necessary to make proxy server settings to use the Internet
radio function. If you made proxy server settings on the computer
to connect to the Internet, make the same proxy server settings on
the S-302.
• The S-302 uses the DHCP and Auto IP functions to make the
network settings automatically.
Turning the Power On (vpage 24)
Once Connections are Completed
Getting Started Connections
n Ethernet cable (CAT-5 or greater recommended)
No Ethernet cable is included with the S-302. Procure a cable with
the necessary length.
NOTE
Be sure to use a shielded type cable for USB/Ethernet connections.
Depending on the connected computer/router, there may be much
noise generated from the cable.
[Wired LAN]
[Wireless LAN]
To WAN side
Internet radio
Router
Computer
To LAN port
To LAN port
To WAN side
Internet radio
Modem
Computer
LAN port/
Ethernet port
Wireless LAN rod
antenna (Supplied)
Turn right
Modem
Network Audio
Router with access point
1.S-302E3_1st.indd 19 2007/07/31 17:44:40