Filter
Top Products
SetupGetting Started Connections Playback Remote Control Information Troubleshooting
Everyday Timer
Settings for Everyday Timer.
[Selectable items] Enable
Disable
[Selectable items] DVD/CD
Tuner
iPod
Set Time
Set Current Time.
• Be sure to set the current time if you want to use the timer playback
function.
• When the function is set to “TUNER”, also set the preset number.
• If the times set for the sleep timer, every timer and once timer
overlap, the priority is as follows:
q sleep timer w once timer e every timer
Checking whether or not the timer is enabled
In the standby mode, press the STATUS button.
The status is displayed on the S-302's display.
1 on/Eoff
(When the once timer is on and the everyday timer is off)
Canceling the timer
Select “DISABLE”.
To turn the timer back on, select “ENABLE”.
Changing the timer settings
Redo the timer setting operation from the beginning.
The previous settings are cleared and replaced with the new settings.
If there has been a power failure
The settings are cleared.
Reset the current time, then make the settings over from the
beginning.
The clock is synchronized with the power supply frequency. It may be
off by about 2 to 3 minutes per month.
In such cases, reset the time.
n Start Time
Set Timer Start Time. (12-hour display)
Example: PM 0:35
n End Time
Set Timer End Time. (12-hour display)
Example: PM 1:00
n Function
Select Timer Function.
ENGLISH
1.S-302E3_1st.indd 27 2007/07/31 17:44:51