Filter
Top Products
0
Setup Playback Remote Control Information Troubleshooting
ENGLISH
• This function automatically converts various formats of video signals input to the S-302 into the format
used to output the video signals from the S-302 to a TV.
• The S-302’s video input/output circuitry is compatible with the following three types of video signals:
Analog video signals: Component video, S-Video and video
GFlow of video signals inside the S-302H
High picture
quality playback
Component video
terminals
S-Video terminal
Video terminal
TV
HDMI terminal
Component video
terminals
S-Video terminal
Video terminal
Video inputs Video outputs
NOTE
• 1080p component video input signals cannot be converted into other formats.
• 480p, 576p, 720p and 1080i component video input signals cannot be converted into S-Video or video
format.
• When not using this function, output the signals to the TV using the same type of terminal as the video
input terminal to which the signals are being input.
• The picture quality is not improved even if the video format to which the signal is converted using this
function offers a high picture quality. The picture quality of the video signals output from the S-302
depends on the input signal.
Video Conversion Function
-
7*%&0
*/
3
System cable
: When the 480i/576i signals are input
Speaker cable
Speaker cable
White
Red
White
Red
ADV-S302
DSW-S302 SC-S302
TV
The set includes
a built-in clock
function. Connect
the set's power
cord to a wall
power outlet to
which power is
always supplied.
Power cord
To household
power outlet
(AC 120 V, 60 Hz)
Video cable
NOTE
• Connect the set's video output directly to the TV. Do not connect it via a VCR (video cassette recorder).
Some discs contain copy prohibit signals, and the picture could be disturbed if such discs are played via
a VCR.
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
• Do not unplug the power cord while the set is operating.
• When connecting system cables and speaker cables, first lay them out sideways. When laying them out
take care not to damage them.
Connecting the System
A home theater can be achieved easily using the included cables to connect the DVD surround receiver
(ADV-S302), subwoofer (DSW-S302), speakers (SC-S302) and your TV set.
Getting Started Connections
1.S-302E3_1st.indd 14 2007/07/31 17:44:33