Denon AVR-4311CI Stereo Receiver User Manual


 
93
Basic versionSimple version InformationAdvanced version
MANUAL SETUP
Set when changing Audyssey
®
Auto Setup settings, or when changing the audio, video, display
or other settings.
If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible
to set MultEQ
®
XT 32, Dynamic EQ
®
and Dynamic Volume
®
(vpage89, 90).
Can be used without changing the settings. Please set if necessary.
Menu operation
1
Press ZONE SELECT to switch the zone mode to
M
(MAIN
ZONE).
The
M
indicator lights.
2
Press AMP to set the remote control unit to AMP-operation
mode.
3
Press MENU.
The menu is displayed on the TV screen.
4
Press ui to select the menu to be set or operated.
5
Press ENTER or p to enter the setting.
• To return to the previous item, press RETURN.
• Exiting the Menu, press MENU while the menu is displayed.
The menu display disappears.
Items that can be set with the “MANUAL SETUP” procedure
SPEAKER SETUP
Change assigned power amp settings to match
the speaker system configuration
Amp Assign
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
HDMI SETUP
Make settings for RGB output range
RGB Range
Vertical Stretch
Normal
Enhanced
Auto Lip Sync
HDMI Audio Out
Monitor Out
HDMI Control
AUDIO SETUP
Setup playback method for analog signals
inputted from external input connectors (EXT.IN)
EXT.IN Setup
2ch Direct/Stereo
Auto Surround Mode
EQ Customize
Subwoofer Level
ZONE SETUP
Make settings for audio playback in a ZONE 2
system
ZONE2
ZONE3
Bass
Treble
HPF
Lch Level
Rch Level
Channel
NETWORK SETUP
Make settings for wired LAN
Network Connecting
Other
Rhapsody Account
Napster Account
Network Info
OPTION SETUP
Make settings for volume control
Volume Control
Source Delete
GUI
Remote Preset Codes
Quick Select Name
Zone Rename
Volume Display
Volume Limit
Power On Level
Mute Level
OPTION
OPTION
Speaker Setup (vpage93)
Zone Setup (vpage103)Network Setup (vpage101) Option Setup (vpage104)
HDMI Setup (vpage98) Audio Setup (vpage99)
LANGUAGE
Select the language displayed on the GUI screen
English
Français
Enter
Language (vpage106)
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confi rm the setting Return to previous menu
Speaker Setup
Default settings are underlined.
Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ XT 32, Dynamic EQ and Dynamic Volume (vpage89, 90).
• MANUAL SETUP can be used without changing the settings. Please set if necessary.
n Change power amp assignment to suit the speaker system confi guration
(Amp Assign)
Examples of Amp Assign menu screen displays
[1st page]
Set items referring to “Steps for setting “Amp Assign”” (vpage94).
[1/2]
AMP ASSIGN
RETURN
Assign power amp to ZONE2 stereo signal
Return
Assign Sp. F.WIDE
Assign Mode ZONE2
ZONE2: ZONE3:
[2nd page]
• The signal being output by each speaker can change according to “Amp Assign” setting.
• The speaker terminals and the output from the pre-out terminals can be checked on this screen.
[2/2]
AMP ASSIGN
RETURN
Check signal output from speaker/PREOUT connectors
Return
Assign Sp. F.WIDE
Assign Mode ZONE2
SPEAKERS
ZONE2
FRONT CENTER
ZONE3 FR SW1 SR SW2 FHR WR
FL C SL FHL WL
L
R
R L
SURROUND
R L
SURR.BACK
R L
F.HEIGHT
R L
ZONE2
R L
PRE OUT
q Current settings
w Signal being output from speaker
terminal
e Output from pre-out terminal
• Terminals not being used are greyed
out.
See also page 5, 6, 56 – 62 for how to
connect the speakers.
q
w
e
1.AVR4311CIEU_ENG_108.indd 93 2010/08/30 20:11:07