Filter
Top Products
59
Basic versionSimple version InformationAdvanced version
For speaker impedance and speaker cable connections, see page 5.
Connect
FR
FR’
FL’
FL
C
SBL SBR
SL
SR
FHR
FHL
SW
Multi channel playback
(Surround mode)
2-channel playback
(Direct/Stereo mode)
Switching
z You can also change the 2-channel playback front speakers to SURR.BACK/AMP ASSIGN or F.HEIGHT/AMP ASSIGN speaker terminals using the “Amp
Assign” and “Assign Sp.” settings (vpage95).
Multi-channel + 2-channel
connection
You can connect the other front speakers for
2-channel playback using the DIRECT mode or
STEREO mode.
The speakers used exclusively for multichannel
playback and the speakers used exclusively for
2-channel playback are automatically switched for
playback in accordance with the surround mode.
To set the speakers for automatic switching during
playback, select “Amp Assign” and set “Assign
Mode”to “2CH” using steps 3 and 4 of “Set up
“Amp Assign”” (vpage63).
When you connect and use both surround back and
front height speakers, either set of speakers is used
for playback depending on the surround mode of
multichannel playback.
1.AVR4311CIEU_ENG_108.indd 59 2010/08/30 20:10:50