Filter
Top Products
Getting Started Connections Setup Multi-Zone Information Troubleshooting SpecificationsOther Operations
Other Operations and
Functions
Playback of Blu-ray Disc HD audio using
DENON LINK 4th
When playing a Blu-ray Disc, you can enjoy jitter-free playback of
the HD audio.
1
Connect this unit to a DENON LINK 4th compatible
Blu-ray Disc player using a DENON LINK cable and
HDMI cable.
b For connection instructions, refer to the respective equipment’s
operating instructions.
2
Assign “DENON LINK” to each of the input sources.
: “Source Select” – “(input source)” – “Assign” –
“Digital” – “DENON LINK”
(vmpage 43
AVC-A1HD
, mpage 46
AVP-A1HD
)
3
Assign the HDMI input terminals used to connect the
player to the input source.
: “Source Select” – “(input source)” – “Assign” –
“HDMI” – “1” ~ “6”
(vmpage 43
AVC-A1HD
, mpage 45
AVP-A1HD
)
4
Set the HDMI control function of this unit to “ON”.
: “Manual Setup” – “HDMI Setup” – “HDMI Control”
– “Control” –“ON” (vmpage 31)
Convenient Functions
SOURCE SELECT INPUT MODE
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
When the upgrade is completed, you will be able
to enjoy high quality playback using DENON
LINK 4th, audio signal transmission developed
by DENON.
5
Set the DENON LINK settings of the player to “4th”.
b For setting instructions, refer to the player’s operating
instructions.
6
Set the HDMI control function of this player to
“On”.
b For setting instructions, refer to the player’s operating
instructions.
7
Select the input source assigned in operations 2 and 3
using SOURCE SELECT.
The “ ” indicator lights on the display.
8
In INPUT MODE, set the audio input mode to
“Auto”.
b When a Blu-ray Disc is played, it is automatically played back using
DENON LINK 4th.
NOTE
Jitter-free playback can only be used when the audio input
mode is set to “Auto”.
9
Select the surround mode.
10
Play back a Blu-ray Disc.
Playback starts according to the type of input signal and surround
mode.
During jitter-free playback, the DENON LINK CLOCK CONTROL
indicator on the player lights.
b For instructions on the operations, refer to the player’s operating
instructions.
b This display may differ depending on the player. For details, refer to
the player’s operating instructions.
Set the input mode to “Auto”, and all discs other than Blu-ray Discs are
automatically played back using DENON LINK 3rd.
NOTE
• When the input mode is set to “HDMI”, jitter-free playback cannot be
used. Playback is in HDMI.
• When the input mode is set to “Digital”, playback is fixed to the
DENON LINK 3rd mode and Blu-ray Disc audio cannot be played
back.
INPUT
MODE
[ AMP]
SOURCE
SELECT
(Main remote control unit) (Sub remote control unit)
SOURCE
SELECT