Filter
Top Products
Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpecificationsSetup
Select the “Cinema”, “Music”, “Game” and “Pro Logic” modes at GUI menu “Parameters” – “Audio” –
“Surround Parameters” – “Mode” (vpage 38).
Surround Playback of 2-channel Sources
DOLBY PLgx or DOLBY PLg
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
:This mode can be selected when a DOLBY Pro Logic decoder is used to play 2-
channel source in 4.1-channel surround sound (Left/Center/Right/Surround Mono).
This can be selected when playing with a DOLBY PLg decoder. When this mode is
selected, “DOLBY PL” is displayed.
n When using a surround back speaker
[Selectable items]
DOLBY PLgx
: This mode can be selected when a Dolby Pro Logic gx decoder is used to play back
2-channel source in 6.1/7.1-channel surround sound including the surround back
channel.
By adding the surround back channel, a stronger surround feeling is obtained compared
to Dolby Pro Logic g.
DTS NEO:X
: This mode can be selected when a DTS NEO:X decoder is used to play back 2-channel
source in a maximum of 9.1 channel surround sound including the surround back
channel.
n When using a front height speaker
[Selectable items]
DOLBY PLgz
: This mode can be selected when a Dolby PLgz decoder is used to play back 2-channel
source in a maximum of 9.1 channel including the front height channel.
By adding a front height channel, the vertical expression is emphasized, improving the
three-dimensionality of the sound.
DTS NEO:X
: This mode can be selected when a DTS NEO:X decoder is used to play back 2-channel
source in a maximum of 9.1 channel including the front height channel.
n When using a front wide speaker
DTS NEO:X
: This mode can be selected when a Dolby PLgz decoder is used to play back 2-channel
source in a maximum of 9.1 channel including the front wide channel.
n When the surround back speakers, front height speakers and front wide
speakers are not being used
[Selectable items]
DOLBY PLg
: This mode can be selected when a Dolby Pro Logic g decoder is used to play back 2-
channel source in 5.1-channel surround sound with a natural, realistic feel.
DTS NEO:X
: This mode can be selected when a DTS NEO:X decoder is used to play back 2-channel
source in 5.1-channel surround sound including the surround back channel.
Operating from the main unit
The “Cinema”, “Music”, or “Game” modes can be directly selected with the CINEMA, MUSIC or GAME
button on the main unit.
Standard Playback
This is the standard mode for enjoying surround sound according to the program source.
To select these surround modes pressing the STANDARD button on the main unit or press the STD button
on the main remote control unit. The mode switches each time the button is pressed.
At this point, configure the “Audyssey DSX™” settings. For details, see page 42.
Operating from the main unit
The “Cinema”, “Music”, or “Game” modes can be directly selected with the CINEMA, MUSIC or GAME
button on the main unit.
DOLBY PLgz
Height
: This mode is the playback mode for Dolby PLgz front height.
DTS NEO:X
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
NOTE
• DTS NEO:X mode cannot be selected when the sampling frequency of the input signal is 32 kHz,64 kHz
and 128 kHz.
• DTS NEO:X cannot be selected when the input signal is DSD.