Denon AVP-A1HD Stereo Amplifier User Manual


 
0
Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpecificationsSetup
Subwoofer Att.
Attenuate subwoofer level when using EXT. IN input.
[Selectable items]
ON
OFF
Set this to “ON” if the subwoofer channel level seems too high when
playing Super Audio CD.
Subwoofer
Turn subwoofer output on and off.
[Selectable items]
ON
OFF
Default
Resets the settings to the default values.
Tone Defeat
Turn tone adjustments off.
[Selectable items]
ON
OFF
NOTE
• The tone cannot be adjusted when in the DIRECT, PURE DIRECT and
HOME THX CINEMA mode.
• “Tone” cannot be set when “Dynamic EQ
®
” (vpage 41) is set to
“ON”.
Bass
Adjust bass for all channels together.
[Variable range]
–6dB ~ +6dB
Treble
Adjust treble for all channels together.
[Variable range]
–6dB ~ +6dB
“Bass” and “Treble” can be set when “Tone Defeat” is set to “OFF”.
s Tone
Adjust the tonal quality of the sound.
Front
Adjust each front channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Center
Adjust each center channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Surround
Adjust each surround channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Surround Back
Adjust each surround back channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Subwoofer
Adjust each subwoofer channel tone.
[Selectable items]
Bass
[Variable range]
–6dB ~ +6dB
This can be set individually for the separate surround mode other than
PURE DIRECT, DIRECT and HOME THX CINEMA mode.
Input Channel
AVP-A1HD
Select channel using external input connectors (EXT. IN) for source
being played.
[Selectable items]
8CH
2CH
Can be selected when GUI menu “Manual Setup” – “Audio Setup”–
“EXT. IN Setup”– “Mode” is set to “DSP” (vpage 26).
Height Gain
Control the front height channel volume.
[Selectable items]
Low
Middle
High
NOTE
“Height Gain” is displayed for the following settings.
• When the “Speaker Setup” – “Speaker Configuration” – “Front
Height” setting (vpage 23) is set other than to “None”.
• When surround mode is “PLgz” or the PLgz decoder is used.
Front Height
Adjust each front height channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB
Front Wide
Adjust each front wide channel tone.
[Selectable items]
Bass
Treble
[Variable range]
–6dB ~ +6dB