Filter
Top Products
The 480R Remote Controller is the ideal complimentary tool to the 480, 481 and 482 DriveRacks.
The 480R can act as the Master unit controller in a DriveRack™ network system. The 480R’s
system Network Access keypad and System mute button make communication and editing of
other DriveRack™ units a breeze. In addition, the 32 Hot Key instant access buttons grant the
user instant access to any editing screen page of any unit in the DriveRack™ network and the
ability to edit graphic equalizer settings as well.
The 480R Remote Controller ships with the included 480P power supply. The 480P is a single
rack space unit that supplies the 480R with power. The 480P is also used to link the 480R with
other units in a Network environment.
DB-9 and RJ 45 Connectors
Either of these connectors can be used to send and receive information from other DriveRack™
units in the network system via the 480P. Cable lengths 480R to 480P - 300 feet max. 500 feet
with dbx proprietary cable. 480P to Network - Up to 4000 feet.
RTA Microphone Input
This input is used to insert a microphone for use with the real time audio analyzer.
Phantom Power Switch
The Phantom power switch is used to engage or turn off the 48V phantom power.
MIDI In and Out/Thru Connectors
These connectors provide MIDI functionality to the 480 DriveRack™. The In, Out and Thru jacks
allow you to use the 480R DriveRack™ at any point in the MIDI chain.
Warning
The 480R can only be powered by the included 480P power supply.
8.1 Rear Panel Connections (480R)
480R Remote Controller
®
74
Section 8
DriveRack
™
DriveRack™ User Manual