Network Functions
®
62
SECTION 7
DriveRack
™
Connection to the GUI Interface:
If you elect to utilize the included GUI PC interface, either the 480, 481 or 482 can act as the
master unit that interfaces with the PC. Once the master unit has been established, access to
all other units within the network system can be controlled via the PC. The following illustra-
tion shows how to establish connection from the PC to the Master controller to the slaves.
• Before the DriveRack™ unit will communicate with the PC via the GUI interface, the includ-
ed GUI software must be loaded onto the selected PC.
DriveRack™ User Manual