Filter
Top Products
®
Utilities
Section 6
DriveRack
™
53
®
DriveRack™ User Manual
Contrast Adjustment
Since venues and applications vary, the 480 and 480R DriveRack™ units provide you with the
option of changing the contrast of the large custom display. To make any adjustments to the
display contrast, press the UTILITY button and use the NEXTPG or PREVPG button to move
to page four of the utility menu. Contrast settings cannot be made to to other units across the
network. Settings must be changed to the selected unit through its front panel interface. The
display will appear something like this
• Use the PARAMETER 1 knob to set the desired display contrast.
The DriveRack™ will allow you to select the PC communication mode of either MIDI or RS 232.
Using this option gives you the ability to use either the MIDI port or the RS232 for sending and
receiving information including Software downloads and System dumps. At any time, both con-
nectors can be connected, but one or the other must be selected from the utilities menu to com-
municate. This can be accessed within the utility menu by using the following procedure:
• From Program mode, press the UTILITY button and use the PREV PG and NEXT PG but-
ton to move to page 6 of the Utility menu.
• Once you have reached page 6, the display will appear something like this:
6.8 PC COMM Mode
6.7 Contrast Adjustment