Crestron C2N-DAP8RC Digital Audio Processor with Room Control
Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 71
C2N- DAP8RC Full Parametric EQ Controls Module
Parametric Equalizer Control Signals
SIGNAL TYPE
(D/A, I/O)*
FUNCTION
Store_PRE DI On the rising edge of Store_PRE, the current
filter values will be stored in the preset specified
by Preset#.
Recall_PRE DI On the rising edge of Recall_PRE, the filter
values of the specified Preset#_FB will be
recalled and propagated to the outputs.
Recall_PRE1 through
Recall_PRE5
DI These inputs offer a simpler way to recall a
preset directly. Preset#_FB will be updated, thus
Store_PRE will store the last preset recalled.
Filter_Channel
AI Selects the digital output channel as follows:
Filter_Channel Value
Left Front 1
Right Front 2
Left Surround 3
Right Surround 4
Left Back 5
Right Back 6
Center 7
Subwoofer 8
No channel 0
Filter_Band AI Each channel has 6 programmable filter sections.
This variable selects which band (from 1 to 6, or
0 for no band selected) to operate on. Specifying
a band will display the current mode, frequency,
bandwidth and gain for that filter. (Not all
parameters apply to all filters types.)
(continued on next page)