Crestron electronic C2N-DAP8RC Speaker System User Manual


 
Crestron C2N-DAP8RC Digital Audio Processor with Room Control
Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC 47
PANORAMA. The purpose of these controls, unique to the Dolby Prologic II Music
mode, is described in “Dolby Pro Logic II” beginning on page 2.
When any of the digital audio inputs are chosen as the source selection, the system
automatically detects the encoding method of the incoming signal and displays the
appropriate decoding mode choices.
Programming Software
Have a comment about Crestron
software?
Direct software related suggestions
and/or complaints to Crestron via
email (software@crestron.com).
Do not forward any queries to this
address. Instead, refer to “Further
Inquiries” on page62 for
assistance.
Setup is easy thanks to Crestron’s Windows
-based programming software. The
following are recommended software version requirements for the PC:
SIMPL Windows, version 2.04.1.1 or later, with Library update 227 or
later.
Crestron Database, version 15.9.6 or later.
Crestron VisionTools
®
Pro-e (VT Pro-e) software for designing
touchpanel pages.
Digital Audio Tools version 1.01.05 or later, with configuration template
for C2N-DAP8RC including surround sound modes and parametric
equalizer settings.
NOTE: The following are acceptable file extensions for programs that include a
C2N-DAP8RC, developed for specific control system types:
.smw projectname.smw (source file)
.spz projectname.spz (compiled file for 2-series)
.umc projectname.umc (SIMPL Windows user macro)
.ush projectname.ush (compiled for SIMPL+)
.usp projectname.usp (source code module for SIMPL+)
.daf projectname.daf (DAT program output)
SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use
programming language that is completely integrated and compatible with all
Crestron system hardware. The objects that are used in SIMPL are called symbols.
SIMPL Windows offers drag and drop functionality in a familiar Windows
environment.
SIMPL Windows is Crestron's software for programming Crestron control systems.
It provides a well-designed graphical environment with a number of workspaces
(i.e., windows) in which a programmer can select, configure, program, test, and
monitor a Crestron control system.
NOTE: The following assumes that the reader has knowledge of SIMPL Windows.
If not, refer to the extensive help information provided with the software.
NOTE: In the following description, the PRO2 control system is used.
This section describes a sample SIMPL Windows program that includes a C2N-
DAP8RC.
Configuration Manager is where programmers “build” a Crestron control system by
selecting hardware from the Device Library. In Configuration Manager, drag the
PRO2 from the Control Systems folder of the Device Library and drop it in the upper
pane of the System Views. The PRO2 with its associated communication ports is
displayed in the System Views upper pane.