Digital Audio Processor with Room Control Crestron C2N-DAP8RC
16 • Digital Audio Processor with Room Control: C2N-DAP8RC Operations Guide - DOC. 8187A
Ear Attachment for Rack Mounting
1. Using a Phillips screwdriver, remove and retain the three side screws
closest to the front panel.
2. Position a rack ear so that its mounting holes align with the vacated
holes, and secure the ear to the unit with the three screws from step 1.
3. Repeat the procedure to attach the remaining ear to the opposite side.
Hardware Hookup
In addition to its capabilities as a surround sound processor, the C2N-DAP8RC
provides tremendous flexibility in audio and video signal distribution. Refer to
“Audio/Video Distribution” below for detailed information. Refer to the basic
hookup diagram following this paragraph, and, other than making the power
connection (NET) last, complete the connections in any order.
NOTE: Refer to “Network Wiring” on page 11 when making connections to the
port labeled NET.