Filter
Top Products
The Antenna Cabling System
RoamAbout Lightning Protector
C-6 Outdoor Antenna Installation Guide
Installation 3
To install the RoamAbout Lightning Protector:
1. Determine a suitable location for the Lightning Protector as
described in Chapter 2 - Installation Guidelines.
2. As shown in Figure C-1, secure bracket (A) to the wall using
two screws (F).
Figure C-1 Lightning Protector Installation
3. Use a ring-terminal to connect ground-wire (C) to bolt (B).
The
ring-terminal and ground wire are provided by the installer
.
4. Secure bolt (B) to the bracket using washers and locknut (D).
5. Loosely install washers and hexnut (G) onto the RoamAbout
Lightning Protector (E).
G
F
E
A
D
C
B