Outdoor Antenna Installation Guide C-1
C
The Antenna Cabling System
The Outdoor Cabling Components 3
To connect your RoamAbout Access Point to an
outdoor antenna installation you will need the
following cabling components as pictured on the
right side of this page:
A. RoamAbout Cable Assembly
B. RoamAbout Lightning Protector
C. Low-Loss Antenna Cable
D. Outdoor Antenna Cable:
• The RoamAbout 14-dBi Directional
Antenna (described in Appendix A), or
• The RoamAbout 7-dBi Omni-Directional
Antenna (described in Appendix B)
Selecting the Correct Connector Type 3
Subject to the country where the RoamAbout
Outdoor Kit and/or antennas are purchased, the
components listed above are equipped with either
Standard N-Type connectors or Reverse Polarity
N-Type connectors.