Filter
Top Products
Installing the Antenna
Connecting the Antenna Cable
4-12 Outdoor Antenna Installation Guide
Sealing the Cable Connectors 4
Most problems associated with wireless outdoor installations are
related to degrading performance due to the effects of corrosion of
the antenna cable and cable connectors. To avoid this type of
problem, always seal the cable connectors that are located
outdoors using waterproof stretch tape.
You are advised to seal the connectors
after
you have verified
optimal antenna alignment. Doing so will enable you to adjust
antenna placement and cable routing without removing the tape.
1. Prepare the cable and connectors so that they are free from
dust, dirt and grease.
2. Attach the tip of the weather proofing tape to the cable just
above the connector.
3. Hold the tape in position, and stretch the tape and wind it half-
lapped around the cable and connectors to form a void-free
joint.
The degree of stretch can vary in different sections of the joint,
as long as the overlaps accomplish a void-free application.
CAUTION
!
To protect the weatherproofing stretch tape from the effects
of Ultra-Violet (UV) radiation (for example from direct
sunlight), you should protect the joint with two half-lapped
layers of any vinyl-plastic electrical tape. Alternatively, you
can apply silicone sealer to protect the weatherproofing tape
from sunlight, rain and other weather conditions.