Filter
Top Products
Installing the Antenna
Planning the Antenna Installation
Outdoor Antenna Installation Guide 4-3
ELECTRICAL HAZARD WARNINGS (Continued)
6. The low-loss antenna cable that connects the antenna to
the lightning protector must be at least 1m (3 ft) away
from any high voltage or high current cable.
7. Check whether the antenna mast and its guy wires or
wall bracket are positioned correctly and secured
properly to the roof or wall(s).
8. Check whether the grounding system for the antenna
mast, the RoamAbout Access Point, and RoamAbout
Lightning Protector have been installed. The grounding
system must comply with the requirements as described
in Chapter 2, Grounding System on page 2-15.
9. Always consult a qualified electrician if you are in doubt
as to whether the antenna mast, Lightning Protector,
and/or RoamAbout Access Point is properly grounded.
10. The low-loss antenna cable between the antenna and
the lightning arrestor must be grounded at all times. If
the cable is disconnected at one end for some reason
(for example, to replace the lightning arrestor), you must
locally ground the exposed metal connector of the cable
during the work.
11. Install the Danger label shipped with the antenna on a
plainly visible area of the antenna support structure.