Cabletron Systems 9033073 Satellite Radio User Manual


 
Installing the Antenna
Mounting the Antenna
Outdoor Antenna Installation Guide 4-5
11. After verifying that the communications link is fully operational,
secure all cables and use weatherproofing tape to seal all
outdoor connectors.
Mounting the Antenna 4
The RoamAbout antennas are available as a RoamAbout 14-dBi
Directional and a RoamAbout 7-dBi Omni-Directional. This section
includes mounting instructions for each of these antenna types.
When mounting multiple antennas on a single mast, use the
following methods to minimize cross-talk between antennas:
Place the antennas as far apart as possible.
Alternate the mounting of directional antennas for vertical and
horizontal polarization (figures on the following pages illustrate
mounting for
vertical
polarization).
Mounting the Directional Antenna 4
You can mount the RoamAbout 14-dBi Directional Antenna on a
mast or on a flat vertical surface such as a wall. In most cases,
mounting the antenna on a mast allows more flexibility in adjusting
the height and direction of the antenna in order to better aim it at
the opposite end of the wireless link.
Mounting on a Mast 4
To mount the RoamAbout 14-dBi Directional Antenna on a mast,
proceed as follows:
1. Verify that you have all the items listed below:
The RoamAbout 14-dBi Directional Antenna
A metal backing plate (included with antenna)
Two U-bolts and two clamps (included with antenna)