Filter
Top Products
Installing the Antenna
Connecting the Antenna Cable
Outdoor Antenna Installation Guide 4-11
5. Prior to securing the cable along its complete length, run the
Point-to-Point diagnostics of the RoamAbout Access Point
Manager program to analyze wireless performance and
optimal placement of the outdoor antenna (see Figure 2-4 on
page 2-17).
6. If required, adjust the direction of the antenna.
7. Once the installation has been fully tested, tighten antenna
mounting nuts to lock the antenna into its position.
8. Secure the cable along its complete length. No part of the
cable should be allowed to hang free. This is especially
important for those parts that are routed outside the building.
9. Use waterproof stretch tape to seal all outdoor connectors.
NOTE
The RoamAbout Access Point Manager program is
described in the RoamAbout Access Point User’s Guide,
which is shipped with the RoamAbout Access Point.
CAUTION
!
To prevent damage, avoid overtightening the connectors,
nuts, and screws used to mount the antenna.