Filter
Top Products
Installing the Antenna
Connecting the Antenna Cable
4-10 Outdoor Antenna Installation Guide
6. Secure the metal mounting bracket (with antenna) to the mast
using two hose-clamps.
7. Connect the outdoor portion of the antenna cable (E) to the
threaded portion of the antenna mounting base.
8. Proceed to
Connecting the Antenna Cable
.
Connecting the Antenna Cable 4
Once the antenna is properly installed, you can connect the
antenna to the RoamAbout Access Point via the RoamAbout
Lightning Protector.
1. Verify that the low-loss antenna cable is properly connected to
the antenna.
2. Secure the antenna cable to the mast such that the cable
connectors do not support the full weight of the cable.
3. Provide a drip-loop at the bottom of the cable just before it
enters the building.
4. Connect the opposite end of the antenna cable to the
RoamAbout Lightning Protector.
CAUTION
!
Avoid overtightening each hose-clamp nut to avoid damage
to the hose-clamp and/or antenna.
CAUTION
!
To avoid damage to the antenna cable and connectors, do
not use tools to tighten cable connectors.